Comprehensive Supplier For The Ceramist
We offer a complete line of ceramic materials, equipment, and supplies;
including clays, glazes, kilns, potter's wheels, tools, slips, underglazes, frits, stains, chemicals, refractories, books, and gift certificates.
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Products

Resources

Enter password:

 


Menders


Home » Misc. Products » Menders

 Checkout
APT ll Ceramic Enhancer
APT ll Ceramic Enhancer
 
Low Firing. Mend, attach, decorate, colors and glazes. 2 oz. jar is .18 lbs.
Price: $5.25

APT ll Mend a Mold
APT ll Mend a Mold
 
Mends plaster molds. 1 oz. jar. Jar Wt. is .1 lbs.
Price: $4.00

APT ll Porcelain & Stoneware Enhancer
APT ll Porcelain & Stoneware Enhancer
 
High Firing. Mend, attach, decorate, colors and glazes. 2 oz. jar. Jar Wt. is .18 lbs.
Price: $5.90

Aztec High-Fire Mender - 2 oz.
Aztec High-Fire Mender - 2 oz.
 
Mender for cone 5 & cone 10 porcelain and stoneware pottery and sculpture. There is a small quanity of mending gel in the jar. Fill to ridge above label with any high fire slip or clay and stir well. Do not wet the piece. Apply with a brush to greenware or bisque, let mender dry, clean, and then fire to normal slip/clay temperature. Do not take internally. Conforms to ASTM D 4236 Section 5 labeling requirement. Gross wt. is .09 lbs.
Price: $8.95

Duncan  SY-545 - Patch-A-Tatch - 4 oz. paste
Duncan SY-545 - Patch-A-Tatch - 4 oz. paste
 
This quality ceramic cement is used to attach or repair greenware or bisque, so it's easy to see why most ceramists consider Patch-A-Tatch an essential product for ceramics. Gently scratch crisscross lines on areas to be joined. Using a soft brush, moisten scored areas or broken edges with water. Use the same brush to apply a good coat of Patch-A-Tatch to these areas. Quickly attach or fit the pieces together and hold securely for a few seconds. Brush a little Patch-A-Tatch over the joint and, when set and thoroughly dry, scrape, sand, sponge or otherwise finish, and the piece is ready for decorating or firing. Clean up with water. For use with cone 04 ceramics only.
Price: $3.05

Magic Mender - 4 oz.
Magic Mender - 4 oz.
 
For cone 06 greenware and bisque. Do not wet the pieces. Stir well, apply with brush to both sides. Press pieces together and hold until they stick together, re-fire. Conforms to ASTM D 4236 Section 5 labeling requirement. Gross wt. is .43 lbs.
Price: $7.95

Mayco -  AC-306 - Clay Mender - 2 fluid oz.
Mayco - AC-306 - Clay Mender - 2 fluid oz.
 
To repair greenware or bisque. Apply heavy coat of Clay Mender on broken edges. Immediately press firmly together. Fire to cone 04. Do not spray. Certified Non-Toxic. Conforms to ASTM C-1023 / D-4236.
Price: $3.15

Mayco -  AC-527 - Mending & Sculpting Paste - 2 fluid oz.
Mayco - AC-527 - Mending & Sculpting Paste - 2 fluid oz.
 
Paste may be applied with a brush or pallete knife to bisque that will be stained. May be used for dimentional effects. Can be colored or mixed with other water soluble products. Thin with water if necessary. Clean up with soap and water. DO NOT FIRE. NOT FOOD SAFE. Certified Non-Toxic. Conforms to ASTM C-1023 / D-4236.
Price: $3.35
Out of Stock