Rounded Handle. 1" x 3" x 6". Ship Wt. 1.5 lbs.

Alumina Oxide, 80 grit bar. Ship Wt. is .2 lbs.

3 large bars at 1" x 2" x 2.5" long. Alumina Oxide, 80 grit bar. Ship Wt. is 1.5 lbs.

Alumina Oxide, 80 grit bar. Ship Wt. is .5 lbs.

Alumina Oxide, 80 grit bar. Ship Wt. is .2 lbs.

Our Ruler Tool is designed to help you measure on the wheel to create consistent sets of pots, bowls, mugs, and more. Use the measuring side of the ruler to make subtle lines in your wall. Trim at the mark you’d like and then smooth away the lines with the opposite side of the ruler. Maybe you’ll leave the lines on for a bit of texture or use this at your bench to mark and cut while you’re hand-building. This tool is multifunctional and the possibilities are endless!

Price breaks per lb. are available at 5, 10, 50, 100, and 500 lb. amounts in checkout.

S2 features a concave end, a good sharp tip, and consistent curved sides. You'll use it for creating perfectly rounded forms, trimming, and subtle shaping. S2 is the smaller of our S tools. size: 4"" long x 2.5"" wide material: cherry wood Comfortable, beautiful, and practical. Handmade by a creative team in St. Louis, MO.

Powdered, heat setting, cone 10 mortar and patching compound. Not suitable for areas where there is not enough heat to bond the mortar. Primarily used for floors, arches, and walls. Flows nicely and cleans up with water. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Volume price breaks are: 5 lbs.-$10.50, 10 lbs.-$17.50, 50 lbs.-$77.50, and 100 lbs.-$130.00, and are available at check out. Ship Wt. is 1 lb.

Slurry, air setting, cone 10 mortar and patching compound. Sodium Silicate is the binder and requires no heating to set. Can be used for floors, arches, and walls, but is excellent for repairs, damper guides on the tops of kiln arches, and areas where there is limited heat to set the mortar. When handling, wear latex or rubber gloves and eye protection. This mortar sets up very fast, so you need to have a clean bucket of water and a sponge handy to clean up as you go. This product can settle and may need to be mixed before using. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Ship Wt. is 2.8 lbs.

Slurry, air setting, cone 10 mortar and patching compound. Sodium Silicate is the binder and requires no heating to set. Can be used for floors, arches, and walls, but is excellent for repairs, damper guides on the tops of kiln arches, and areas where there is limited heat to set the mortar. When handling, wear latex or rubber gloves and eye protection. This mortar sets up very fast, so you need to have a clean bucket of water and a sponge handy to clean up as you go. This product can settle and may need to be mixed before using. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Ship Wt. is 19 lbs.

Slurry, air setting, cone 10 mortar and patching compound. Sodium Silicate is the binder and requires no heating to set. Can be used for floors, arches, and walls, but is excellent for repairs, damper guides on the tops of kiln arches, and areas where there is limited heat to set the mortar. When handling, wear latex or rubber gloves and eye protection. This mortar sets up very fast, so you need to have a clean bucket of water and a sponge handy to clean up as you go. This product can settle and may need to be mixed before using. As with all mortars, any sulfates that come to the surface of a kiln wall after drying must be removed with a stiff brush. If these sulfates are not removed, they will form a glaze on the brick surface. Ship Wt. is 52 lbs.

This is a feldspathic sand from California.

This is a feldspathic sand from California.

Next price break is 500 lbs. in checkout. This is a feldspathic sand from California.